Anti-Dust Epoxy System
The system is based on a two-component epoxy primer with a consumption of 250-500g / sqm and a final two-component epoxy resin layer, 0.6mm thick for light traffic surfaces or 1-2mm for medium traffic. The final layer is applied with a special roller or squeegee.
The system can also be made in the non-slip version.
It can be applied on helicopter screeds, mosaic, concrete surfaces, tiles.
Application steps:
- Surface preparation by milling, sandblasting, as appropriate.
- Application of the primer layer
- Surface repair, if necessary
- Application of the final layer
Economic Epoxy System
The system is based on a two-component epoxy primer with a consumption of 250-500g / sqm and a final two-component epoxy resin layer, 0.6mm thick for light traffic surfaces or 1-2mm for medium traffic. The final layer is applied with a special roller or squeegee.
The system can also be made in the non-slip version.
It can be applied on helicopter screeds, mosaic, concrete surfaces, tiles.
Application steps:
- Surface preparation by milling, sandblasting, as appropriate.
- Application of the primer layer
- Surface repair, if necessary
- Application of the final layer
Anti-slip epoxy system
Non-slip floors are the solution for spaces where the risk of slipping is high. The non-slip epoxy system is very resistant, offers superior protection against chemical and mechanical agents, abrasion, temperature variations. The system involves the integration of a layer of quartz in the resin.
It can be applied on helicopter screeds, mosaic, concrete surfaces, tiles.
Application steps:
- Surface preparation by milling, sandblasting, as appropriate.
- Application of the primer layer
- Surface repair, if necessary
- Application of the quartz layer
- Application of the final layer
Self-leveling epoxy flooring system
The system can be applied on concrete surfaces. Following the application, continuous, smooth surfaces are obtained, with high mechanical resistance destined for intense circulation, ensuring a good protection for acid, alkaline, oils, fats solutions.
The resulting surface is easy to clean, maintenance-free and meets health standards. The self-leveling epoxy system can be applied in production spaces, offices, parking lots, mechanical workshops, medical offices, even in homes.
The self-leveling epoxy system is a rigid one, with a layer thickness of 1-5mm. The surface resistance is given by the thickness of the resin layer.
Application steps:
- Surface preparation by milling, sandblasting, as appropriate.
- Application of the primer layer
- Surface repair, if necessary
- Application of the final layer
The system can be made in any RAL shade, the final layer can be plain, a mixture of colors, decorated with chips.
Would you like to talk?
If you have a project in mind or want to find out more about our services and activity, do not hesitate to contact us.
Send us an e-mail and we will contact you to arrange a meeting to discuss the requirements of your project.